58. GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
0, 48
Font A (12
24)
1, 49
Font B (9 17)
[Details] HRI indicates Human Readable Interpretation.
HRI characters are printed at the position specified by GS H.
[Default] n = 0
[Reference] GS H, GS k
59. GS h n
[Name] Select bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] 1 n 255
[Description] Selects the height of the bar code.
n specifies the number of dots in the vertical direction.
[Default] n = 162
[Reference] GS k
60. ①GS k m d1...dk NUL②GS k m n d1...dn
[Name] Print bar code
[Format] ① ASCII GS k m d1...dk NUL
Hex 1D 6B m d1...dk 00
Decimal 29 107 m d1...dk 0
② ASCII GS k m n d1...dn
Hex 1D 6B m n d1...dn
Decimal 29 107 m n d1...dn
[Range] ① 0 m 6 (k and d depends on the bar code system used)
② 65 m 73 (n and d depends on the bar code system used)
[Description] Selects a bar code system and prints the bar code.
m selects a bar code system as follows:
To Next Page
Loading...
