IDS 816 Installer Manual

IDS 816 700-283-02I Issued September 2009
19
LOCATION 0 Defaulting of the Panel or Master User Code
Value
Action
0
Will reset all locations to the factory default values.
(Master User Code 1234) and all keypad IDs will be defaulted.
1
Will default the master user code to 1234
- or 123456 if 6 digits are being used.
Master user code properties will also be defaulted.
2 Defaults ALL users
3 Defaults ALL keypads
4
Remove Missing Devices
A missing device (keypads, for example), will have its address freed up, making
its address available for a new device when it is enrolled. This MUST be done
when replacing a faulty device – see “Enrolling Keypads and other Devices”,
page 13.
7.6.1 Zone Options
LOCATIONS 1 - 16 Individual Zone Setup
Sub-location 1 Zone type
The first sub-locations of program locations 1 - 16 are used to define the zone characteristics of each of
the sixteen zones. There are 13 zone types. Table 3 provides a location/zone cross-reference together
with the default zone characteristics.
Table 3 : Location / Zone Defaults
Zone
Location
Sub-location 1 Default
Zone Type
1 1 1 Entry / Exit
2 2 2 Follower
3
3
4
Audible Instant
4 4 4 Audible Instant
5 5 4 Audible Instant
6 6 4 Audible Instant
7 7 4 Audible Instant
8 8 4 Audible Instant
9 9 0 Disabled
10 10 0 Disabled
11 11 0 Disabled
12 12 0 Disabled
13 13 0 Disabled
14
14
0
Disabled
15 15 0 Disabled
16 16 0 Disabled
Table 4 provides a complete list of the different zone types together with a description of their
characteristics.

IDS 816 Specifications

General

Brand	IDS
Model	816
Category	Keypad
Language	English