IDS 816 Installer Manual

IDS 816 700-283-02I Issued September 2009
37
Table 10 : Standard Contact ID Reporting Codes
Description
Codes
Description
Codes
Keypad medical 1100 Cancel 1406
Fire 1110 Open by download 1407
Keypad Fire
1110
Open with key-switch
1409
Panic
1120
Low battery
1302
Panic zone 1120 Sounder/Relay trouble 1320
Keypad panic 1120 Expansion module fail 1333
Duress 1121 Zone/Sensor bypass 1570
Burglary violation 1130 Zone/Sensor bypass restoral 3570
Perimeter violation 1131 Burg. bypass 1573
Interior violation 1132 Test report 1602
24 Hour (safe) violation 1133 Panic restore 3120
Entry/Exit violation 1134 Zone restoral 3130
Day/night violation 1135 Keypad tamper restore 3137
Outdoor violation 1136 Zone restoral 3130
Tamper violation
1137
Sensor tamper restore
3144
Keypad tamper
1137
Expansion module tamper restore
3145
Keypad lockout 1137 RF low battery restore 3384
Near alarm violation 1138 Close by user 3401
Tamper by zone 1144 Close by auto arm 3403
Expansion module tamper 1145 Close by download 3407
Exp. module low bat 1338 Close with key-switch 3409
RF receiver jam detect 1344 Expansion module fail restore 3333
Long range transmitter fault 1353 AC loss 3321
Loss of supervision RF 1381 AC restoral 3333
RF low battery
1384
Low battery restore
3302
Open by user
1401
Sounder/Relay restore
3320
NOTES ON DOMESTIC REPORTING:
If Dual Reporting is enabled, Domestic reporting may either be reported to 2 telephone numbers or using
the dual reporting option, report to a central station as well as to an individual mobile phone etc. This
format provides for a simple form of easily identifiable remote alarm which may be reported to an office,
mobile phone etc.
A series of tones is transmitted to the phone, which notifies the user that an alarm condition
has occurred. If a 1 is programmed to a location, a single beep will be heard if that particular alarm
condition occurs. If a 2 is programmed to a location, 2 beeps will be heard etc.
NOTE:
If the system is armed using the quick arm key [1] the system will report a close by user 35.
If the system is armed by means of a key switch or non-latching remote receiver connected to
an arm/disarm zone the system will report a close by user 34.
Enabling / Disabling Reporting Groups
Locations 118 to 120 are used to either enable or disable the reporting of groups of reporting codes
when using Contact ID.

IDS 816 Specifications

General

Brand	IDS
Model	816
Category	Keypad
Language	English