IDS X Series - Wireless Integration; Wireless Zone Expander Bus Connection; Xwave Wireless Expander

IDS X-Series Training v2.7 | Hardware
15
9. Wireless Integration
The X-Series Panels supports both IDS Xwave and IDS Xwave
2
wireless zone expanders. Xwave
2
only
supported from version 2.7x and higher. (X64 and X16)
LEDs
Tamper Switch
Tamper
Dip switches Dip switches
LEDs
12V DC Outputs 12V DC Outputs
Bus D+ D- Bus D+ D-
Note: You can have the Xwave and Xwave
2
occupy the same zone range, but you can’t learn an
Xwave detector to an Xwave
2
expander and vice versa.
9.1. Wireless Zone Expander Bus Connection
X-Series panels can support up to four Xwave wireless expanders and four Xwave
2
wireless expanders
which are connected onto the RS485 keypad bus. Each expander can support up to 16 wireless devices.
Each expander must have an ID to map the zone numbers.
Xwave Wireless Expander
Xwave
2
Bi-directional Hub