12
3. Installation
3.1 Opening and Inspecting Packing Crates
Note:
Prevent the crate cover from warping when placed at an
angle. Place the packing crate level.
Note:
• Only complete the installation if all parts are present and undamaged.
• Inform IECHO customer service if any parts are missing or damaged.
• Replenish or replace missing or damaged parts.
A Remove all screws on the upper side of the packing crate.
B Remove the cover and place it to one side.
C Remove the screws from the upper crossbars
D Remove the crossbars and place them to one side
E Loosen the screws of the side cover.
F Remove the side cover.
G Make sure the contents are complete and without damage.
To Next Page
Loading...
