IECHO TK4S - 8. Maintenance; 8.1 Daily Maintenance

61
8. Maintenance
8.1 Daily Maintenance
 Check all the sockets of power as well as the connector of serial cable.

Before cutting, make X/Y running with slow speed, then check whether has abnormal sound.
 Without cutting, start the tools which can rotate automatically (electric oscillating tool, pneumatic oscillating tool,
driven rotary tool and milling), check whether the tools are OK.
 Clean everything after finishing the jobs.

Clean up the dust and oil in Y guide daily.
 Clean up the water in the regulating valve of air compressors and equipment.

Keep machine away from wet conditions.
8.1.1 Check the general pressure valve and waterlog.
8.1.2 Clean the felt surface and the dust on the machine surface.
.