IECHO TK4S - 10. Safety Attentions; 11. Other Information; 11.1 Products Details; 11.2 Warranty Card

66
10. Safety Attentions
GND electrical wire connected to the ground.
Use the required specification wires for electric power connection, as per the big cutter power.
Check the synchronous belt before switch on the machine, in case it`s blocked by materials fragments.
Press the Emergency stop button or switch off the power in case of emergency.
Operators and staffs shall not reach into the danger area when the cutter is working.
In principle, any troubleshooting work or inspection on the cutter is to be carried out
only when the power is off.
Cutting heads adjustment and tools changes shall be carried out only when it is stopped.
11.Other Information
11.1 Products Details
11.2 Warranty Card
Note:
If you need to consult, repair, or replace objects, please call our company's service telephone
number. Please fill the form and keep the warranty card, as the warranty service certificate for you.
The warranty is one year (equipment installation shall prevail).
Name
Model
Date
Serial No
QC
Products Information
Model
Serial No
Warranty Time
Purchase Time
Customer Information
Attention
Tell
Company Name
Address
E-mail