ICE-BT-T6 COM Express Module
Page 7
1.7 Technical Specifications
The ICE-BT-T6 technical specifications are listed below.
ICE-BT-T6
Form Factor
PICMG COM Express R2.1 Type 6
On-board SoC
Standard
o Intel® Celeron® processor J1900
(2GHz, quad-core, 2MB cache, TDP=10W)
o Intel® Celeron® processor N2930
(1.83GHz, quad-core, 2MB cache, TDP=7.5W)
o Intel® Celeron® processor N2807
(1.58GHz, dual-core, 2MB cache, TDP=4.5W)
By request
o Intel® Atom™ processor E3845
(1.91GHz, quad-core, 2MB cache, TDP=10W)
o Intel® Atom™ processor E3827
(1.75GHz, dual-core, 1MB cache, TDP=8W)
o Intel® Atom™ processor E3826
(1.46GHz, dual-core, 1MB cache, TDP=7W)
o Intel® Atom™ processor E3825
(1.33GHz, dual-core, 1MB cache, TDP=6W)
o Intel® Atom™ processor E3815
(1.46GHz, single-core, 512KB cache, TDP=5W)
Memory
Two 204-pin 1066/1333 MHz dual-channel unbuffered DDR3L
SDRAM DIMM slots support up to a total of 8 GB of memory
Internal Storage
2-Kb serial I
2
C bus EEPROM supports EAPI Rev. 1.0
Graphics Engine
Intel® HD Graphics Gen 7 with four execution units
Supports DirectX 11.1, OpenGL 4.2 and OpenCL 1.2
Ethernet
Intel® I210 Ethernet Controller
BIOS
UEFI BIOS
Embedded Controller
ITE IT8528E/FX