IEI Technology ICE-BT-T6 User Manual

ICE-BT-T6 COM Express Module
Page 54
5.3.8 Thermal Configuration
Use the Thermal Configuration menu (BIOS Menu 13) to configure the thermal control
settings.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
Thermal Configuration Parameters
Critical Trip Point [90 C]
Passive Trip Point [85 C]
Dynamic Platform & Thermal Framework
DPTF [Disabled]
CPU Sensor Participant
Critical [70 C]
Passive [60 C]
Ambient Sensor Participant
Critical [70 C]
Passive [60 C]
DDR Sensor Participant
Critical [70 C]
Passive [60 C]
Super Debug [Disabled]
Current Logical Processor [Disabled]
Start P-State [PO]
Step size [25%]
Power Control Setting [CORE offlining]
Performance Control Setting [CORE offlining]
DPPM [Enabled]
T
his value controls the
t
emperature of the ACPI
critical Trip Point in
which the OS will shut
the system off.
---------------------
 : Select Screen
 : Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
BIOS Menu 13: Thermal Configuration
 Critical Trip Point
Use the Critical Trip Point option to control the temperature of the ACPI critical trip point
in which the OS will shut the system off. The following options are available:
 90 C Default
 87 C
 85 C
 79 C
 71 C
 63 C

IEI Technology ICE-BT-T6 Specifications

General

Brand	IEI Technology
Model	ICE-BT-T6
Category	Motherboard
Language	English