Ier N0C902A - Page 33

IER 560 COMBO PRINTER
User Guide
Page 33
N0C902A Rev. 2
Sept. 14, 2010
Ce document est la propriété d’IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated
without prior written authorization
Note: When loading ATB stock, always begin with the lowest
channel. Refer to the channel identification on the printer's
rear panel to locate the channels (see figure
below).
1
2
3
4
1 – Lower channel: L
2 – Mid-lower channel: ML
3 – Mid-upper channel: MU
4 – Upper channel: U
Figure 3.1
Channel Identification (Rear View of Printer)