Ier N0C902A - Poor Print Quality; Frequent Error Signals

IER 560 COMBO PRINTER
User Guide
Page 50
N0C902A Rev. 2
Sept. 14, 2010
Ce document est la propriété d’IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated
without prior written authorization
5.1.4. POOR PRINT QUALITY
Several reasons may cause poor print quality:
▪ Dirty print mechanism
▪ Print parameter settings do not correspond to the type of
media used
▪ Faulty part(s)
Regardless of what it is, this type of operating malfunction
requires help desk assistance.
5.1.5. FREQUENT ERROR SIGNALS
IMPORTANT: Once an error is resolved, press the RESET/EJECT
key in order to reinitialize the printer and to
acknowledge the error.
Review of the possible printer indicator states:
: Indicator off
: Indicator steadily lit
: Indicator slowly blinking
: Indicator rapidly blinking