Ier N0C902A - MEDIA REMOVAL PROCEDURE

IER 560 COMBO PRINTER
User Guide
Page 42
N0C902A Rev. 2
Sept. 14, 2010
Ce document est la propriété d’IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated
without prior written authorization
3.3. MEDIA REMOVAL
3.3.1. PROCEDURE
To remove the media from the printer, grasp the media strip
and simply pull it towards the rear of the printer.
IMPORTANT: To do this, you do not have to open the cover, nor
perform any action inside the printer.
Figure 3.9
Media Removal