Ce document est la propriété d’IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated
without prior written authorization
5.2. CLEARING A DOCUMENT JAM
Preliminary Steps: In order to effectively clear a jam, refer to
the following sections:
Indicator and Key Functions, see
page 43.
Frequent Error Signals, see page 50.
5.2.1. PROCEDURE FOR CLEARING A DOCUMENT JAM
Unload the paper from the printer
Open the printer cover in order to locate the jam, see
page 14.
Clear the jam in the area(s) concerned.
Close the printer cover, see page 14.
Reload the printer with paper and press the
RESET/EJECT key in order to reinitialize the printer and
acknowledge the error, see page 32.
Note: If necessary, rotate the cutter/burster module in order to
facilitate access to the paper path; the cutter/burster module
being open, the entire paper path is accessible (see page
16).
To Next Page
Loading...
