IFM Electronic CR0403 - Configurations; Set up the Runtime System

39
ifm Programming Manual ecomatmobile BasicController (CR0403) Runtime System V03.02 2015-04-01
Configurations Set up the runtime system
4 Configurations
Set up the runtime system ................................................................................................................... 39
Set up the programming system ......................................................................................................... 42
Function configuration in general ........................................................................................................ 46
Function configuration of the inputs and outputs ................................................................................ 47
Variables .............................................................................................................................................. 56
1016
The device configurations described in the corresponding installation instructions or in the Annex
(→ page 204) to this documentation are used for standard devices (stock items). They fulfil the
requested specifications of most applications.
Depending on the customer requirements for series use it is, however, also possible to use other
device configurations, e.g. with respect to the inputs/outputs and analogue channels.
>
4.1 Set up the runtime system
Reinstall the runtime system ............................................................................................................... 40
Update the runtime system ................................................................................................................. 41
Verify the installation ........................................................................................................................... 41
14091