IFM Electronic CR0403 - Function Configuration in General; Set up the Programming System Via Templates; System Variables

46
ifm Programming Manual ecomatmobile BasicController (CR0403) Runtime System V03.02 2015-04-01
Configurations Function configuration in general
>
4.2.2 Set up the programming system via templates
13745
ifm offers ready-to-use templates (program templates), by means of which the programming system
can be set up quickly, easily and completely.
970
When installing the ecomatmobile DVD "Software, tools and documentation", projects with
templates have been stored in the program directory of your PC:
…\ifm electronic\CoDeSys V…\Projects\Template_DVD_V…
► Open the requested template in CODESYS via:
[File] > [New from template…]
> CODESYS creates a new project which shows the basic program structure. It is strongly
recommended to follow the shown procedure.
>
4.3 Function configuration in general
3971
>
4.3.1 System variables
15576
All system variables (→ chapter System flags (→ page 204)) have defined addresses which cannot be
shifted.