5
UK
3.1 Applications
• Food and hygienic areas
• Detection of almost all media
• Available process connections: G1/2, G3/4 and G1
• Different probe lengths for various mounting positions and for temperature
decoupling (→ 4.3.2)�
Type Factory setting
1)
Sensitivity
1)
Probe
length
2)
Process connection EHEDG 3A
LMT100 aqueous media low 11 mm G1/2 ● ●
LMT110 oils, greases,
powders
high 11 mm G 1/2 ● ●
LMT121 media with low
water content
medium 11 mm G 1/2 ● ●
LMT102 aqueous media low 38 mm G 1/2 ● ●
LMT104 aqueous media low 153 mm G 1/2 ●
3)
LMT105 aqueous media low 253 mm G 1/2 ●
3)
LMT202 aqueous media low 28 mm G3/4, tuning fork
contour
LMT302 aqueous media Low 38 mm G1, tuning fork
contour
1)
Sensitivity adjustable (→ 8 Parameter setting)
2
) Probe length measured from conical sealing edge (→ Technical data)
3)
Approval only applies if the unit is used without PEEK sealing ring (→ 5.2.2)
When a suitable unit has been selected, the presence of certain media is
detected, deposits or foam are suppressed�
To Next Page
Loading...
