47
UK
Process
value
line
Title line
Status
LED
Type
Description
Output
response
Error correction
Lock via
commu-
nication
--- --- Parameter setting
locked via push-
buttons, parameter
setting is active via
IO-Link communi-
cation
OU Finish parameter
setting via IO-Link
communication�
Lock via
system
--- --- Setting buttons
locked via parameter
software, parameter
change rejected
OU Unlock the unit via
IO-Link interface
using the parameter
setting software�
IO-Link IO-Link
flash
OUT1
OUT2
IO-Link function for
optical identification
of the unit active
OU Deactivate IO-Link
function�
*
Detection zone , Figure 1�
Error In the event of an error, the outputs react according to the setting under
[FOU1] and [FOU2] �
Warning
LED flashes
LED flashes quickly
13 Maintenance, repair and disposal
As a rule, no measures for maintenance are necessary�
Define regular calibration intervals according to the process requirements�
Recommendation: every 12 months�
Only the manufacturer is allowed to repair the unit�
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations�
To Next Page
Loading...
