44
10.7 Diagnostic functions
10.7.1 Read min/max values
Select [Lo�x] or [Hi�x] to display the highest or lowest process value
measured:
- [Lo�F] = min� value of the flow volume measured in the process
- [Hi�F] = max� value of the flow volume measured in the process
- [Lo�T] = min� value of the temperature measured in the process
- [Hi�T] = max� value of the temperature measured in the process
- [Lo�P] = min� value of the pressure measured in the process
- [Hi�P] = max� value of the pressure measured in the process
Delete memory:
Select [Lo�x] or [Hi�x]�
> [----] is displayed�
Briefly press [
�
It is recommended to delete the memories as soon as the unit oper-
ates under normal operating conditions for the first time�
Menu MEM:
[Lo�x]
[Hi�x]
10.7.2 Simulation
Select [S�FLW] and set the flow value to be simulated�
Select [S�TMP] and set the temperature value to be simulated�
Select [S�PRS] and set the pressure value to be simulated�
Select [S�Tim] and set the time of the simulation in minutes�
Select [S�On] and set the function:
- On = The simulation starts� The values are simulated for the time
set with [S�Tim]� Cancel by pressing any button�
- OFF = The simulation is not active�
Menu SIM:
[S�FLW]
[S�TMP]
[S�PRS]
[S�Tim]
[S�On]
To Next Page
Loading...
