SAFETY
IC50 ENG 1-7
PRECAUTIONS AT TRANSPORTING
CAREFULLY LOAD AND UNLOAD THE MACHINE
• ALWAYS load and unload the machine on the level
ground.
• Use a ramp that has sufficient strength, width, length,
and thickness.
• Remove ice, snow, or slippery material from the ramp
and truck deck before loading.
• NEVER make a turn on a ramp.
OBSERVE PRECAUTIONS ON TRANSPORTATION.
• Blocks tracks and secure the machine to the truck
before transporting.
• Securely fix the machine to the platform using a wire
rope, etc.
• Transport safely strictly following the concerned laws.
PRECAUTIONS AT MAINTENANCE
KEEP ROUTINE MAINTENANCE
• Wrong maintenance not only causes damage to the
machine but also has the danger of causing accidents
that involve injury to humans.
• You must read and understand the warnings and
instructions contained in this manual, before
performing any operation or maintenance procedures.
INDICATIONS DURING INSPECTION AND
MAINTENANCE
Hang a warning board saying “Under Inspection /
Maintenance” at an easy to see location of the operation
lever so that nobody other than the concerned persons
touches it.
To Next Page
Loading...
