UNO Synth PRO X
3 – Front Panel Interface
11
3.2 – Sound Editing
The sound editing section is comprised of 15 buttons, 22 knobs and 6 lighted indicators.
Each time you need to go deeper into the editing of a section, PUSH the DATA encoder. You will jump directly
inside the EDIT PRESET menu, being able to move inside it with using PUSH, DATA and BACK.
The EDIT PRESET menu is where all the parts of the synth engine, even the ones not shown on the interface,
are available for editing.
To access this menu press PRESET while the “home” page is shown. To exit, use BACK the number of times
necessary to exit the nested menu.
NOTE: We can call HOME page the display view where the name of the preset, the slot number, the tempo and
the voice mode are shown.
To Next Page
Loading...
Need help?
General
