UNO Synth PRO X
3 – Front Panel Interface
21
3.8 – Effects
UNO Synth PRO X is equipped with 3 slots of digital effects, which are MODulation, DELAY and REVERB. There
is also an Analog DRIVE in the global section.
All effects are mono-to-stereo, 48 kHz 16-bit. All effects are routed as sends, so the audio signal path will always
be analog.
EFFECTS
Pressing the button will toggle between the three effect slots and relative controls.
Three LEDs marked M, D and R display the currently selected effect.
AMOUNT
Adjust the selected effect amount between 0% and 100%.
BYPASS
Enable/Disable the bypass on the whole effects section.
MOD AMT
Can be used to adjust the modulation effect amount without selecting it first.
DLY AMT
Can be used to adjust the delay effect amount without selecting it first.
REV AMT
Can be used to adjust the reverb effect amount without selecting it first.
EFFECT TYPE
Can be used to change the type of effect of the selected slot.
To Next Page
Loading...
Need help?
General
