UNO Synth PRO X
1 – Introduction
6
1.4 – Precautions
Locations
Using the unit in the following locations can result in a malfunction:
• In direct sunlight
• Location of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields
Power Supply
Please use only the power supply provided with the unit and connect the cable to the correct port on the device.
Please note: the USB-C port can power the unit, however is meant to be used as secondary source. Use the
provided power supply for optimal use.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate the unit at a suitable
distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the knobs, buttons or the OLED display.
Care
If the exterior becomes dirty, wipe it with a clean and dry cloth. Do not use liquid cleaners such as benzene or
thinner, or cleaning compounds of flammable polishes.
Keep this manual
After reading, please keep this manual for later reference.
Keep foreign matter out of your unit
Never set any container with liquid in it near this unit. If liquid gets into the unit, it could cause a breakdown, fire
or electrical shock. Be careful not to let metal objects get into the equipment. If something does slip into the
unit, unplug the power and/or the USB cable, then contact your nearest IK Multimedia dealer or the store where
the equipment was purchased.
Specification subject to change
The information contained in this manual is believed to be correct at the time of printing. However, IK Multimedia
reserves the right to change or modify any of the specifications without notice or obligation to update existing
units.
To Next Page
Loading...
Need help?
General
