UNO Synth PRO X
3 – Front Panel Interface
27
3.11 – Bassline Mode
The BASSLINE mode is meant to change the behavior of the synth to mimic the inspiring limitations of the
original 303 bassline. That does not mean it will mimic the sound, since the analog components and engine is
different, instead to mimic the behavior of some of the controls and the interaction between those.
For example, when ON the cutoff and envelopes get limitations in ranges or controls:
CUTOFF: The upper frequency limit is moved from 20 kHz to approximately 5 kHz.
ENV: The envelopes controls will be limited to Attack and Decay controls with a higher minimum limit. The
Sustain and Release will be anyway available in the PRESET EDIT menu.
Two parameters will be now available on the panel:
ACCENT: Determines the amount of accent between 0 and 127.
ACCENT DECAY: Determines the decay time of the accent envelope modulation.
The interaction between the various points is an important aspect of this mode, and helps get the feeling and
specific musicality of a bass and groove machine.
The best part of this mode is that it’s fitted in a super powerful synth engine, so you will still get the 3 OSCs, the
2 filters, modulators and bipolar controls for those inspirations from the past to get sounds for the future.
That is the aim. So have fun - a lot of fun!
To Next Page
Loading...
Need help?
General
