IK Multimedia UNO Synth PRO X - Calibrate; Os Update

UNO Synth PRO X
4 – Global Controls
33
4.2.10 – CALIBRATE
UNO Synth PRO X does a calibration and tuning of the oscillators each time it’s turned on. From the Setup
menu you can start a calibration process for the oscillators.
4.2.11 – OS UPDATE
Sets UNO Synth PRO X in FW update mode. You can exit this stage only with a complete power circle,
disconnecting all the power cables from the unit (power supply and USB).