UNO Synth PRO X
3 – Front Panel Interface
24
3.8.3 – Reverbs
TYPE (SHIFT + AMOUNT)
Selects between HALL, PLATE and SHIMMER-S.
PRE-DELAY
Adjusts the pre-delay time between 0 ms and 200 ms. This control can be found inside the PRESET EDIT
MENU.
SIZE
Adjusts the reverb size between 0 and 100.
TIME
Adjusts the reverb decay time. Each type has a different way to deal with the decay:
HALL PLATE will have 3 controls: TIME with min 0.1 and max 30 sec, TIME LOW and TIME HIGH (with
the same range). Changing TIME will automatically change the other 2 settings. If you changed manually
TIME LOW or HIGH, the control TIME will automatically retain the ratio between the controls.
REVERSE: Time is a feedback control that goes from 0% to 100%.
SHIMMER: Time works as a Diffusion control between 0 and 100.
FILTER
Adjusts the LPF IN from 50 Hz to 10 kHz.
To Next Page
Loading...
