The StellarMate X Manual
107
/
260
1.
Select the range of exposures, binning, temperatures and count (if applicable)
required.
2.
Each time you change a selection, the Total Frames count is updated to reflect
the required frames.
3.
When ready, tap the Play button to start the process.
2. Create Defect Map:
After creating a master dark, you can create a defect map for your camera. Usually,
defect maps are used when dark frame subtraction does
not improve the quality of the calibration result. This is especially evident when using
uncooled guide cameras that can exhibit hot pixels that are
hard to treat with classical dark frame subtraction methods.
1.
Selecting the master dark frame, loads the infomation of the image
2.
Then adjust Hot and Cold pixel sliders to include or exclude pixels.
3.
Click Generate Map to inspect the results and once satisfied tap the save button
To Next Page
Loading...