The StellarMate X Manual
6
/
260
Connect the USB-C power supply cable to StellarMate X and then turn power on. There is
no need to push the power button as the unit automatically boots up when power is
connected. A soft blue light indicates the unit is powered up. Startup time should take less
than 30 seconds after which the unit is ready to be used.
Introduction
Description:
StellarMate X is a compact and powerful Astrophotography Controller that supports
numerous Mounts, Cameras, and other astronomical equipment. Powered by Open
Source technologies and designed and built by Astrophotographer for Astrophotographers.
It provides unparalleled freedom in selecting your favorite platform to remotely control your
equipment. You can use
Ekos astrophotography
tool on Windows, MacOS, or Linux.
Furthermore, use StellarMate App on iOS and Android to automate your complete
astrophotography workflow. StellarMate X is simple:
1. Connect your equipment (Mount, Camera, DSLR, Focuser, Filter Wheel..etc) to
StellarMate X via USB or WiFi.stellarmate x tablet
2.
Connect to StellarMate X from either your Mobile, Tablet, or Laptop/Desktop Computer.
3.
Start controlling your observatory and image from any major platform.
StellarMate X is quiet with no moving parts. It is four times faster than its predecessor
StellarMate Plus and comes with double the storage and memory capacity enabling fast
and seamless control for the most demanding and high-resolution astro cameras. It
features a special VESA mount to secure it to standard dovetails and clamps.
Quick Startup
The following is the quick startup guide to getting StellarMate X up and running in a few
minutes using your phone/tablet:
1.
Download Stellarmate App from the Android/iOS store.
2.
Launch the App and Register an account.
3.
Connect the power adapter to StellarMate and turn power on.
To Next Page
Loading...
Need help?
General