The StellarMate X Manual
121
/
260
adjusted if a mechanized rotator is detected. Otherwise, a manual
camera rotation is required until the image position angle is
satisfied.
4. Guide
: Using a guide camera, the mount tracking is locked to a
guide star to enable long-exposure astrophotography
5. Position Angle:
Select the desired Sky Position Angle in degrees (East
of North). Ignore this setting to image using the camera current position
angle. Use Target tab
Framing Assistant
tool to visually adjust the field
of view until the desired orientation is achieved.
on angle:
You can also
specify and position angle.
o Job Startup
1.
Culmination Offset:
Start the observation job when the object reaches
culmination adjusted for the offset value in minutes. By default, the
observation job runs 60 minutes prior to culmination.
2. ON:
Start the job on the specified date and time.
3. ASAP:
Start the observation job as soon as all the contraints, if any, are
To Next Page
Loading...