The StellarMate X Manual
61
/
260
Train
You can Select / Edit a train specifically for Focus module. Each module has it's own train.
Visit
Optical trains
topic for more.
Auto focusing
You can do auto focusing by either keeping the preset setting as default or choosing an
existing preset and then tapping on Auto Focus. The image viewer will show you the current
image being captured by your camera, with a square around the detected star. An HFR
Plot is also available on the right side of the screen to inform you about the current motor
step and the HFR (Half-Flux-Radius). The blue points are the previous focus points, and the
green point is the latest focus point. The HFR value is displayed under the HFR Plot.
To Next Page
Loading...