The StellarMate X Manual
71
/
260
Capture & Solve
To start capturing and solving, just tap on the Capture & Solve button and the StellarMate
will take care of the rest. When it's done, you will be able to see the current Alignment
capture preview, alignment info on the solution bar on the bottom, and the points on the
Alignment plot. The points on the alignment plot have 3 different colors: Red, Yellow and
Green. If a point is red, that means that the error is 1.5 times or more above the accuracy
value, if it's yellow, that means that the error is between 1 times to 1.5 times above the
accuracy value, and finally, if it's green, that means that the error is within the accuracy
value. The accuracy value can be changed in the preset settings.
To Next Page
Loading...