The StellarMate X Manual
80
/
260
Select Refresh & Algorithm
In the Refresh Stage, the user can adjust the refresh rate by changing the input on the right
side, pressing Refresh to start the process.
(Note: at this stage, the refresh only starts once Refresh is clicked)
There are two different algorithms you can choose for PAA:
1. Plate Solving:
Uses plate solving to track what the corrected alignment error is during
the refresh process . User should try reduce the error in the Updated error line below
and minimize the size of arrows. This is the only scheme that can fully correct an error
larger than the image field-of-view, but depends on reliable plate solving.
.
2.
Move Star and Calc error
: Like Move Star, but Ekos attempts to track the star being
moved and estimates the current alignment error when it can.
To Next Page
Loading...