The StellarMate X Manual
83
/
260
Train
You can Select / Edit a train specifically for Align module. Each module has it's own train.
Visit
Optical trains
topic for more.
Guiding
You can start guiding by tapping on the Start button. The guide module will start by
calibrating, and then will start the guiding process. When guiding is in progress, you will be
able to see the Guide plot being populated with lines for the RA drift, DE drift and the Total
RMS. You can also check the values for RA RMS, DE RMS and Total RMS under the plot.
To Next Page
Loading...