The StellarMate X Manual
91
/
260
1.
Preset name
2.
Frame Type
3.
Exposure
4.
Binning
5.
Format
6. Encode
7.
Filter
8.
Temperature
9.
Gain/ISO
10.
Offset
After creating your presets, you can now tap on the preset dropdown in order to select the
preset you want, and then tap on Add to Sequence, so the sequence can be added to the
sequence list.
In the below example, you can see that there are 3 different jobs in the sequence list as
shown by the filter in the beginning of each one. (red, green, and blue)
Sequences have the following structure, displayed through icons for simplicity:
·
Top row
1.
Job Number
2. Job Progress Bar
3.
Count Progress
4. Delete Job
·
Bottom row
1.
Filter
2.
Frame Type
3.
Binning
To Next Page
Loading...