iLine microsystems microINR link - microlNR System Components; Kit Description; Meter Parts; Charging the Meter

2.1 DESCRIPTION OF THE microINR® Link KIT
The microINR Link kit includes the following materials.
Make sure these items are included into the kit:
- Case
- microINR Link Meter
- Charger
- Plug adapter
- Instructions for use of the microINR Link Meter
- Quick guide
- Error guide
- Lancing device with instructions
(exclusive for Reference Kit KTD0001XX)
- Lancets (exclusive for Reference Kit KTD0001XX)
microINR Chips are sold separately.
Always carry the Meter inside its case.
06
2.2 PARTS OF THE microINR® Link METER
2.3 CHARGING THE microINR® Link METER
The Meter uses a lithium battery that can be recharged
through the mini USB connection on the top of the Meter.
The recommended charging time is approximately 3 hours.
MINI USB CONNECTION
EXIT (E) BUTTON
MEMORY (M)
BUTTON
CHIP
INSERTION
AREA
DISPLAY
2. microINR® SYSTEM