iLine microsystems microINR link User Manual

21
TEST RESULTS IN INR
UNITS OR ERROR CODE.
TIME
HOURS : MINUTES.
THE RESULT IS
ABOVE OR BELOW
THE MEASURING
RANGE OF THE
SYSTEM ↓0.8  ↑8.0.
DATE
DAY : MONTH : YEAR.
BLINKING
INDICATES “APPLY
SAMPLE”.
THE DEVICE IS
CONNECTED VIA
THE MINI USB
CONNECTION.
DEBUG MODE,
USED FOR
METER UPDATE.
THE RESULTS OF
THE BLOOD TEST
ARE DISPLAYED
IN INR FORMAT.
INSTRUCTS THE USER
TO WAIT UNTIL THE
METER COMPLETES A
CERTAIN ACTION.
THE CODE
DISPLAYED IS AN
ERROR CODE.
THE PREANALYTICAL
CONTROLS HAVE BEEN
COMPLETED
SUCCESSFULLY.
AMOUNT OF
REMAINING
BATTERY
POWER.
THE FLUID BEING
TESTED IS PLASMA
LIQUID CONTROL.
THE STORED
RESULTS ARE BEING
DISPLAYED.
BLINKING
INDICATES
“INSERT CHIP”.
8.4 SYMBOLS
“Manufacturer”
“Temperature limit”
“Consult the instructions for use”
”Catalogue number”
“in vitro diagnostic medical device”
“Serial number”
”Direct current”
“Electronic waste
selective collection”
CE “CE Marking”
0123
Notified Body Identification Number
(only applies for the Selftesting Use certification)
“Batch code / Lot Number”
“Biological hazard”
“Precaution”
“Warning”

iLine microsystems microINR link Specifications

General

Brand	iLine microsystems
Model	microINR link
Category	Measuring Instruments
Language	English