Immergas Victrix Pro 80 2ErP - 3.5 230 V circuit wiring diagram.

40
1
2
3
4
5
6
4
5
7
39
INSTALLERUSER
MAINTENANCE TECHNICIAN
3.5 230 V CIRCUIT WIRING DIAGRAM.
Key: A2 - P.C.B. A4 - Display board E1 - Ignition electrode E2 - Detection electrode G2 - Igniter M1 - Boiler circulator pump M20 - Fan M30 - ree-way valve (optional) S1 - Main switch X90 - Boiler conguration jumper Y1 - Gas valve Z1 - Antijamming lter
1 - External relay (optional) 2 - Alarm
Potential-free contact MAX. 230 Vac 0,8 A MAX. cosφ ≥0,6
3 - System side pump
Potential-free contact MAX. 230 Vac 0,8 A MAX. cosφ ≥0,6
4 - External relay (optional) 5 - Coil 230 Vac - Max. 0.1 A 6 - External pump (Driven by M1 pump) 7 - D.H.W. pump
Colour key: BK - Black BL - Blue BR - Brown G - Green GY - Grey OR - Orange P - Purple PK - Pink R - Red Y - Yellow Y/G - Yellow / Green W - White W/BK - White / Black
For safety reasons the P.C.B. envisions a fuse that cannot be re-
stored in series with the electric power supply of the gas valve.
Congure the corresponding parameters when connecting in
“simple cascade”, or when connecting in “system side ow probe”,
or “D.H.W. pump”.