General 1-1
kina40e 01.fm technical handbook(1007)
1 General
The refrigerant leak detector HLD5000 is delivered ready for use. Even so, we
strongly recommend that you carefully read this manual so as to ensure optimum
operating conditions right from the start.
1.1 Introduction
1.1.1 Purpose
The HLD5000 is suited for running sniffer leak tests on air conditioning and
automotive air-conditioning systems (overpressure method). Its area of application is
within the air-conditioning industry and it is used to check air-conditioners as well as
components these contain.
Applied guide lines, harmonized standards and applied national standards in
languages and specifications:
The HLD5000 must not be operated while standing in water or under running or
dripping water. The same applies to all other kinds of liquids.
The HLD5000 should only be used indoors.
Avoid contact of the HLD5000 with bases, acids or solvents and also avoid
exposure to extreme climatic conditions.
The HLD5000 must not be operated in explosion hazard areas.
Do not use the HLD5000 on hot surfaces.
EN 50081-1 electromagnetical compatibility
EN 61000-6-2 electromagnetical compatibility
EN 61010-1 electrical safety
To Next Page
Loading...
Need help?
General
