11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
6. Operation System
6.1 Power on / Power off
Press and hold down P (4) button for 3s to start up the device, the image appears on the
display screen. After 6s, the device is turned on.
Press and hold down P (4) button for about five seconds to shut down the device.
6.2 Standby Mode
Enter/exit the standby mode with pressing the P (4) button briefly for power saving.
6.3 Status bar
The status bar is located at the bottom of the screen, which shows information such as
image mode, screen brightness, E-Zoom, Reticle types, Sharpness, Bluetooth (on),
ultra-clear mode (on), video out (on), battery status.
6.4 Navigation Menu
In the normal display interface, press M (5) button briefly to switch in the order of
"none menu - screen brightness - image mode - sharpness - E-zoom - exit the navigation
menu". And press P (4) button and the C (6) key to adjust the parameters of each
function. Navigation menu interface is as shown in fig. 6-1.
Fig. 6-1 Navigation Menu
⚫ Screen brightness：1~4 brightness level.
⚫ Image mode: W (White hot), B (Black hot), R (Red hot), C (pseudo color).
To Next Page
Loading...
Need help?
General
