T Series Handheld Thermal Camera ·User Manual
5.2 Analysis Settings
Click the “analysis settings”button on the screen, now you can make changes to the temperature
type(Max. temperature, Min. temperature and AVG temperature)on the already added spot/lines/regions,
and you can also choose whether to display the screen max. Temperature and min. Temperature, see the
following figure for the detailed settings.
5.3 Alarm
Choose alarm on the settings interface, then you can change the alarm conditions for the already added
spot/lines/regions. After the alarm function is enabled, the spot/line/region on the image will flash and
make alarming sounds when the temperature of the spot/line/region reaches the set alarming conditions.
To Next Page
Loading...
Need help?
General
