T Series Handheld Thermal Camera ·User Manual
5.4.4 Wi-Fi
Connect Wi-Fi by searching for the Wi-Fi signals, then refer to 4G introduction to login the software to
view videos.
5.5 Other Settings
Click “other settings” button on the screen to enter into the other settings interface, then the saved image
format, system time, screen brightness and languages can be set.
The weather, wind speed, voltage and load current can be set according to the conditions on site.
Default text, the default text can be typed into the device according to the conditions on site, the you
can add default texts to images to save time when operating on site.
Color of isotherm: to adjust the color of isotherm.
Image format: PNG/JPG/state grid JPG, PNG is optimized infrared image, JPG is normal infrared
image, state grid standard JPG can be analyzed by state grid software.
Video format: “H.264” recording video is available and it can be reviewed. However, the “total
emission infrared video” is full pixel infrared video which can be viewed, secondary analysis can also
be performed on the images, the size of the video format is relatively big.
Image fusion: choose the appropriate distance to get the best fusion effect.
5.6 Smart Image Capture
5.6.1 Load smart image capture package
The following interface will pop up after clicking the “smart image capture” button in the settings interface.
To Next Page
Loading...
Need help?
General
