IN5316HD/IN5318 – User’s Manual
– 5 –
17.
USB
Connect the USB CABLE from a computer
(used for presentation slide control with the projector remote)
18.
DISPLAYPORT Connect a DISPLAYPORT CABLE to a DISPLAYPORT source
19.
HDMI Connect the HDMI CABLE from an HDMI device
20.
VGA2 Connect the RGB CABLE from a computer or a video enabled device
21.
RJ45 Connect a LAN CABLE for networking purposes
Solid Red Normal operation
22.
READY LED
Flashing Red Lamp is not ready
23.
TEMP LED Solid Red Overheating
Solid Red Standby
Solid Green Normal operation
24.
PWR LED
Flashing
Gre
en or
Red
LED error messages
44
25.
POWER button
Turns the projector on or off (main power switch must
be turn
ed on first).
12
26.
VGA1 Connect the RGB CABLE from a computer or a video enabled device
Note:
If your video equipment has various input sources, it is recommended to connect in priority of
HDMI, component, S-Video, Composite for better picture quality.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
