IN5316HD/IN5318 – User’s Manual
– 19 –
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to navigate and make changes to
the OSD.
1. To enter the OSD, press the MENU
button.
2. There are six menus. Press the cur-
sor ◄► button to move through the
menus.
3. Press the cursor ▲▼ button to mov
e
up and down in a menu.
4. Press ◄► to change val
ues for set-
tings.
5. Press ME
NU to access a different
menu, leave a submenu or close the
OSD.
Note:
Depending on the video source, not all items in the OSD are available. For example, the PC Detail
Adjustment item in the
Display
menu can only be modified when connected to a PC. Items that are
not available cannot be accessed and are grayed out.
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
