InFocus in5316HD - Adjusting the Projector Level

User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the
projector so that it is perpendicular to the screen.
• Re
move and discard the foam spacers on the rear leveling feet before adjusting the pro-
jection angle.
• Ensure the cables are
in a safe location. You could trip over them.
1.
To raise the level of the projector,
twist the leveling feet clockwise.
2.
To lower the level of the projector,
lift the projector and twist the level-
ing feet counter clockwise.
– 14 –
Downloaded from ProjectorsManual.com Manuals