User’s Manual
PC Detail Adjustment
Press the ENTER/SELECT button to enter the PC Detail Adjustment sub menu.
Note:
Customizing the settings in PC Detail Adjustment menu is only available when PC input source (ana-
log RGB) is selected.
ITEM DESCRIPTION
Press the RE-SYNC button on the projector keypad or the AUTO IMAGE button on
the remote control to automatically adjust frequency, phase, and position.
Auto
Frequency Press the ◄► buttons to adjust the A/D sampling number.
Phase Press the ◄► buttons to adjust the A/D sampling clock.
Horizontal Position Press the ◄► buttons to adjust the display position right or left.
Vertical Position Press the ◄► buttons to adjust the display position up or down.
– 26 –
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
