53
52
4-3. Using the Web Interface
First, set the IP address of the Wi-Fi module to use a web page. After set the IP Address
and connect user’s PC with Adhoc Mode or connect the AP with Infrastructure Mode, users
could access the AP and IP to see the webpage.
This Webpage supports Explorer v6.0 ~ 8.0, Firefox v3.x, Opera v9.6+ and Chrome v1.0+.
When the users want to access the page, it requires a certication procedure like the
Image 1 below.
If it is certied right, users can access the Module’s web server and set the module in
webpage. Please see the below for the Interface of Webpage.
Figure 1 - Website Login
Username: admin
Password : admin
Figure 2 - Setting Menu
Chart 1 – Description of Menu
Title Description
IP Setting Set the Address value related to Internet Protocol.
Link Status Show the status of current module.
Site Survey
After showing the AP that is around you, in order to connect to AP, it can
be connected by each security protocol from providing setting page for
protocol.
Statistics Show the communication status of current module.
Advance Users can set the 802.11 B/G/N setting or the Channel.
Management Users can set the time, Webpage account, and etc.
Reboot and Default Users can set the rebooting or the factory initialization.
Upgrade Firmware Users can update the all the Firmware Modules.
Upload Certicate Users can upload the Security Certication.
Status It shows the system information and address value of wireless LAN.
Statistics It shows the current memory usage or the amount of transmitted packet.
VER. History It shows the rmware version of module.
4-3-1. Setting Menu
To Next Page
Loading...
General