32
CD1-a
Chapter 5 – Parameter setting
Chapter 5 - Parameter setting
The parameter setting softw are VISUAL DRIVE SETUP, which is PC compatible with the WINDOWS® operating
system, allows an easy modification of all amplifier parameters.
Please, see Web Site www.infranor.fr for downloading the VISUAL DRIVE SETUP software.
WARNING
The auto-tuning procedure should be executed by the PC in control mode and at standstill. If the
auto-tuning procedure must be executed with the drive controlled by the analog command input
CV, the value of the input command MUST be 0 Volt. It is the user's responsibility to take all
necessary steps in order to reduce the risk due to uncontrolled axis movements during the auto-
tuning procedure.
!
To Next Page
Loading...
