Page 26
Copyright© 2019 Ingenico
Refund Password
Your terminal is configured to use the Supervisor code to protect both the
Refund and the Supervisor functions. If you would like a separate code enabled
in order to protect the Refund function please contact the terminal Helpdesk.
This feature could be used to allow one member of staff the added ability to
perform a Refund; while allowing another member(s) of staff the ability to
perform the Supervisor functions.
Supervisor Menus
The Supervisor menus allow access to various management functions in your
terminal. To be able to access the Supervisor menu, you must use the
Supervisor code.
To access the Supervisor menus press the button twice, then choose
SUPERVISOR and press button. You will be asked to type your current
supervisor code, and confirm this by pressing the button.
Once you have access to the Supervisor menus, press the button to cycle
through the various menu screens.
The following pages show a summary of the Supervisor functions and how to
access them, and what they do.
Some Supervisor functions MUST only be used when instructed
to do so by the terminal Helpdesk.
To Next Page
Loading...
Need help?
General
