Inovance MD380-5T5.5GB - Page 83

Function Code Table
MD380 User Manual
- 82 -
)unction
Code
Parameter Name
Setting Range
Default Property
)0-12 )requency upper limit
)UHTXHQF\ORZHUOLPLW)WR
PD[LPXPIUHTXHQF\)
50.00 Hz ƿ
)0-13 )requency upper limit off
set
0.00 Hz to maximum frequency
)
0.00 Hz ƿ
)0-14 )requency lower limit
0.00 Hz to frequency upper limit
)
0.00 Hz ƿ
)0-15 Carrier frequency
0.5–16.0 kHz
Model
dependent
ƿ
)0-16
Carrier frequency
adjustment with temperature
0: No
1: Yes
1 ƿ
)0-17 Acceleration time 1
±V) 
±V) 
±V) 
Model
dependent
ƿ
)0-18 Deceleration time 1
±V) 
±V) 
±V) 
Model
dependent
ƿ
)0-19
Acceleration/Deceleration
time unit
0:1s
1: 0.1s
2: 0.01s
1 ƾ
)0-21
)requency off
set of auxiliary
frequency source for X and
Y operation
0.00 Hz to maximum frequency
)
0.00 Hz ƿ
)0-22
)requency reference
resolution
1: 0.1 Hz
2: 0.01 Hz
2 ƾ
)0-23
Retentive of digital setting
frequency upon power
failure
0: Not retentive
1: Retentive
2 ƿ
)0-24
Motor parameter group
selection
0: Motor parameter group 1
1: Motor parameter group 2
2: Motor parameter group 3
3: Motor parameter group 4
0 ƾ
)0-25
Acceleration/Deceleration
time base frequency
0D[LPXPIUHTXHQF\)
1: Set frequency
2: 100 Hz
0 ƾ
)0-26
%ase frequency for UP/
DOWN modi¿cation during
running
0: Running frequency
1: Set frequency
0 ƾ
efesotomasyon.com