Inovance MD600 Series - Page 61

Common Parameter Settings
‑60‑
Param
eter
Code
Commu
nication
Address
Parameter Name Value Default Unit Change
Mode
F0‑26 0xF01A Maximum motor
frequency
0.00 Hz to 599.00 Hz 50.00 Hz Unchangea
ble
F0‑29 0xF01D Main frequency
source
0: F0‑30
2: AI1
5: Pulse reference
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Potentiometer MD‑BP‑M
Others: F connector
0 ‑ Real time
F0‑30 0xF01E Digital setting of
main frequency
0.00 Hz to A2‑17 50.00 Hz Real time
F0‑31 0xF01F Auxiliary frequency
source
0: Invalid
2: AI1
5: Pulse reference
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Potentiometer MD‑BP‑M
Others: F connector
0 ‑ Real time
F0‑32 0xF020 Main and auxiliary
frequency
operation
0: Main frequency + auxiliary frequency
1: Main frequency ‑ auxiliary frequency
2: Max. (|main frequency|, |auxiliary
frequency|)
3: Min. (|main frequency|, |auxiliary
frequency|)
4: Main frequency x auxiliary frequency
0 ‑ Real time
F0‑33 0xF021 Auxiliary frequency
source
0: Invalid
2: AI1
5: Pulse reference
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Potentiometer MD‑BP‑M
Others: F connector
0 ‑ Real time
F0‑34 0xF022 Main frequency
gain coefficient
source
0: 100%
2: AI1
5: Pulse reference
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Potentiometer MD‑BP‑M
Others: F connector
0 ‑ Real time