Inovance MD600 Series - Page 66

Common Parameter Settings
‑65‑
Param
eter
Code
Commu
nication
Address
Parameter Name Value Default Unit Change
Mode
F2‑27 0xF21B Digital setting of
negative frequency
lower limit
d1‑04 to 0.0% 0.0 % At stop
F2‑36 0xF224 Overexcitation gain
(V/f)
0% to 200% 90 % Real time
F2‑37 0xF225 Overcurrent
suppression
0: Disable
1: Enable
1 ‑ At stop
F2‑38 0xF226 Overcurrent
suppression point
80% to 300% 200 % At stop
F2‑39 0xF227 Overvoltage
suppression
0: Disable
1: Enable
1 ‑ At stop
F2‑40 0xF228 Overvoltage
suppression action
voltage
330.0 V to 800.0 V 770.0 V Real time
F2‑41 0xF229 Maximum rise
frequency during
overvoltage
suppression (V/f)
0 Hz to 50 Hz 5 Hz At stop
A0‑00 0xA000 Parameter
initialization
0: No action
1: Restore parameters (excluding motor
parameters) to factory settings
2: Clear records
3: Restore parameters (including motor
parameters) to factory settings
4: Back up current user parameters
5: Clear fault information
501: Restore user parameters from backup
503: Restore parameters (including motor
parameters) to factory settings and clear
records
0 ‑ At stop
A0‑01 0xA001 User password 0 to 65535 0 ‑ Real time
A0‑02 0xA002 Basic password 0 to 65535 0 ‑ Real time
A0‑05 0xA005 Current permission
level
0: Monitoring permission
1: Basic permission
2: Expert permission
3: Manufacturer permission
0 ‑ Unchangea
ble
A0‑06 0xA006 Password input
window
0 to 65535 0 ‑ Real time
A0‑07 0xA007 Backed‑up
parameter clear
0: No operation
500: Clear all backed‑up user parameters
1000: Clear all backed‑up motor
parameters
0 ‑ At stop